16ft × 7ft × 7ft Enclosed Trailer - E-Track + Tie-Down Package Included

This 16' × 7' × 7' enclosed cargo trailer provides a secure, weather-protected space for hauling motorcycles, ATVs, smaller UTVs, household belongings, furniture, appliances, tools, equipment, and jobsite materials.

For easier and safer cargo control, the trailer is equipped with installed E-Track rails and a customer-use accessory package at no additional charge. The movable anchors, wheel chocks, and ratchet straps let you configure securement points around the load instead of relying on a few fixed tie-down locations.

Please reference the photos for the interior dimensions, E-Track layout, door configuration, and available tie-down points.

## Weight Ratings

- GVWR: 7,000 lbs
- Estimated maximum payload: approximately 5,400 lbs
- Rule of thumb: The combined weight of the trailer and cargo must remain at or below 7,000 lbs.


## Trailer Features

- Fully enclosed 16' × 7' cargo area
- Approximately 7' of interior height
- Installed E-Track cargo-control system
- Tie-down and loading accessory package included
- Spare tire included
- Electric trailer brakes
- 2-5/16" hitch ball required
- 7-way trailer electrical connection

The enclosed body helps protect cargo from weather and provides greater theft deterrence than an open utility trailer. Before booking, confirm that your vehicle or equipment will fit through the trailer’s door opening—not only inside the cargo area.

## Common Uses

- Motorcycles and dirt bikes: Use the removable E-Track wheel chocks with evenly tensioned straps to help prevent tipping or movement.
- ATVs and smaller UTVs: Secure the vehicle at four suitable points and use wheel chocks when appropriate.
- Household moves: Use movable O-ring anchors and straps to keep furniture, appliances, and boxes from shifting.
- Contractor loads: Secure tools, machinery, and building materials to reduce movement and interior damage.
- General cargo: Reposition the E-Track fittings to create anchor points suited to mixed or irregular loads.

## Customer-Use Accessory Package

The following equipment is available for use during the rental at no additional charge. Availability is subject to inspection and condition at pickup.

- Camco Trailer Aid Plus tandem-axle tire-changing ramp
- Rhino USA 1" × 10' retractable ratchet straps with S-hooks — four-pack
- Mytee Products removable 7" E-Track/X-Track motorcycle wheel chocks — two-pack
- DC Cargo Mall 14" × 24" zippered E-Track storage bag
- Rhino USA 2" × 10' retractable E-Track ratchet straps
- DC Cargo Mall heavy-duty steel E-Track O-ring anchors — ten-pack

The removable wheel chocks are designed for motorcycle tires up to approximately 7" wide. Always confirm that each chock, strap, anchor, and attachment point is appropriate for your specific load.

## Tow-Vehicle Requirements

Your tow vehicle must be properly equipped for the trailer and its loaded weight. Typical requirements include:

- Adequate towing capacity for the trailer and cargo combined
- Adequate payload and tongue-weight capacity
- Functional brake controller for the trailer’s electric brakes
- 2-5/16" hitch ball and properly rated receiver
- Functional 7-way trailer connector
- Correct hitch height and secure safety-chain connections

If you are unsure whether your vehicle is properly equipped, please contact us before pickup.

## Cargo and Equipment Safety

The renter is responsible for staying within all trailer and tow-vehicle weight ratings and for securing cargo correctly.

- Never exceed the trailer’s 7,000-lb GVWR.
- Never exceed the Working Load Limit of any strap, anchor, fitting, rail, or attachment point.
- Securement capacity is determined by the lowest-rated component in the system.
- Do not use break strength as the allowable working load.
- Inspect all straps, fittings, and wheel chocks before use.
- Do not use equipment that appears worn, cut, bent, loose, or damaged.
- Distribute cargo evenly and maintain appropriate tongue weight.
- Recheck the load and strap tension shortly after beginning the trip and at regular stops.
- Use the tire-changing ramp only according to its manufacturer’s instructions and only when compatible with the trailer’s axle and suspension configuration.

Motorcycles should be placed in a suitable wheel chock and secured evenly from both sides. ATVs and UTVs should normally be secured at four appropriate points. Furniture, appliances, tools, and loose cargo must be restrained against movement during acceleration, braking, and turns.